Control Panel - How to Install CentOS Web Panel (CWP) on CentOS 6 and 7 | Vevioz Community

Control Panel How to Install CentOS Web Panel (CWP) on CentOS 6 and 7

DevOps

Linux Systems Engineer
Joined
Oct 18, 2019
Messages
136
Reaction score
11
Points
18
Location
Indonesia
Website
www.anymusics.com
Offline
Web-Server-Setup-Series-–-Install-Configure-CentOS-Web-Panel.jpg

Installation guide
To avoid facing any issues, please make sure to read all of this instructions manual thoroughly prior to the installation process.

Requirements Before the Initialization of CentOS Web Panel installer:

– We only support static IP addresses. We do not support dynamic, sticky, or internal IP addresses.
– We do not provide an uninstaller. After you install CWP, you must reinstall the server to remove it.
– Only install CWP on a freshly installed operating system without any configuration changes.

System Requirements

Make sure that you complete the following tasks before you start the installation process:

1. Setup Hostname
This hostname cannot be the same as any domain that is on your server (for example, if example.com is a domain on your server, use hostname.example.com as your fully qualified hostname).

You can use the following command for hostname setup eg. srv1.example.com

Code:
hostname srv1.example.com
2. Setup Server IP addresses
Define additional IP address, subnet address, and default gateway IP address for your server — your service provider can provide you with this information.

3. Software Requirements
You must have a clean/fresh installation of supported operating systems:
CentOS 6, RedHat 6 or CloudLinux 6, MINIMAL installation and English version only!
CentOS 7 is also supported, we recommend minimal version.
CentOS 8 is NOT supported yet.

4. Hardware Requirements
32 bit operating systems require a minimum of 512 MB RAM
64 bit operating systems require a minimum of 1024 MB RAM (recommended)
Recommended System: 4 GB+ RAM so you would have the full functionality such as Anti-virus scan of emails.

OPTIONAL: You can download CentOS 6/7 Installation here (if your hosting provider doesn’t offer it)

Download CentOS 6.x – 32bit (minimal)
Please, Log in or Register to view URLs content!


Download CentOS 6.x – 64bit (minimal) (recommended)
Please, Log in or Register to view URLs content!


Download CentOS 7.x – 64bit (minimal) (recommended)
Please, Log in or Register to view URLs content!


Download CentOS for openVZ
Please, Log in or Register to view URLs content!


1. Preparing Server
Let’s install required packages for CWP installation
Code:
yum -y install wget
2. Server Update
Now we need to update your server to the latest version
Code:
yum -y update
3. Reboot Server
Reboot your server so that all updates can take effect
Code:
reboot
Now you are ready to start CWP Installation
CWP installer can run more than 30 minutes because it needs to compile apache and php from source.

CentOS 6: New Installer with MARIA-DB 10-latest
Code:
cd /usr/local/src
wget http://centos-webpanel.com/cwp-latest
sh cwp-latest
CentOS 7: Installer for CentOS 7
Code:
cd /usr/local/src
wget http://centos-webpanel.com/cwp-el7-latest
sh cwp-el7-latest
If the download link doesn’t work then you can use the following:
CentOS 6:
Please, Log in or Register to view URLs content!

CentOS 7:
Please, Log in or Register to view URLs content!


Reboot Server
Reboot your server so that all updates can take effect and CWP gets started.
Code:
reboot
OPTIONAL: INSTALLER ARGUMENTS
Available long name arguments
–restart yes (for automatic restart after successfull install)
–phpfpm [5.3|5.4|5.5|5.6|7.0|7.1|7.2|7.3] (you can use only one)
–softaculous yes (install softaculous – script installer)

Available short name arguments
-r yes (for automatic restart after successfull install)
-p [5.3|5.4|5.5|5.6|7.0|7.1|7.2|7.3] (you can use only one)
-s yes (install softaculous – script installer)

Example for centos 7 (you can combine short and long name arguments)
Code:
sh cwp-el7-latest -r yes --phpfpm 5.6 --softaculous yes
Any of this additionals can be also installed later from cwp gui.

CentOS Web Panel Configuration

Log in to your CWP server using the link provided by the installer on your server
CentOS WebPanel Admin GUI at
Please, Log in or Register to view URLs content!

Username: root
Password: your root password

– Setup nameservers
– Setup shared ip (must be your public IP address)
– Setup at least one hosting package (or edit default package)
– Setup root email
& now you are ready to host domains…
 
Top Bottom